Файл:2016AZ8 Radar.gif

Нет версии с бо́льшим разрешением.

2016AZ8_Radar.gif ‎(400 × 400 пкс, размер файла: 574 КБ, MIME-тип: image/gif, закольцованный, 7 фреймов, 1,4 с)

Этот файл находится на Викискладе. Сведения о нём показаны ниже.

Викисклад — централизованное хранилище для свободных файлов, используемых в проектах Викимедиа.

Краткое описание

Описание2016AZ8 Radar.gif	English: Range-Doppler radar images of near-Earth asteroid 2016 AZ8 with range resolution (vertical axis) of 7.5 m/pixel and Doppler frequency resolution (horizontal axis) of 0.03 Hz where the sequence of images over the almost 40 min of data and (right) is the first frame, obtained over about 3 min.
Дата	4 января 2019
Источник	http://www.naic.edu/~pradar/press/2016AZ8.php Direct image link: http://www.naic.edu/~pradar/asteroids/animations/2016AZ8/2016AZ8.04jan18ut.gif
Автор	Arecibo Observatory/NASA/NSF

Лицензирование

	Этот файл находится в общественном достоянии (англ. public domain), так как он был создан NASA (Национальным управлением по аэронавтике и исследованию космического пространства). Политика авторского права NASA гласит, что «Материал NASA не защищается авторским правом, если не указано иное». (См. Template:PD-USGov, страницу политики авторского права NASA или политику использования изображений JPL.)
	Предупреждения: Использование эмблем, знака и логотипов NASA ограничено законом США 14 CFR 1221. На веб-сайте NASA размещено большое число изображений Советского/Российского космического агентства и других неамериканских космических агентств. Они вовсе не обязательно находятся в общественном достоянии. Материалы, основанные на данных космического телескопа «Хаббл», могут быть защищены авторским правом, если не очевидно, что они созданы STScI (Научным институтом космического телескопа).[1] См. {{PD-Hubble}} и {{Cc-Hubble}} или {{Spacetelescope.org}}. Совместный проект SOHO (ESA & NASA) предполагает, что все материалы, созданные их зондом, защищены авторским правом и требуют разрешения для коммерческого необразовательного использования. [2] Изображения, показанные на веб-сайте Astronomy Picture of the Day (APOD), могут быть защищены авторским правом. [3]

История файла

Нажмите на дату/время, чтобы посмотреть файл, который был загружен в тот момент.

	Дата/время	Миниатюра	Размеры	Участник	Примечание
текущий	00:15, 14 февраля 2020		400 × 400 (574 КБ)	Nrco0e	User created page with UploadWizard

Использование файла

Следующая страница использует этот файл:

2016 AZ8

Глобальное использование файла

Данный файл используется в следующих вики:

Использование в en.wikipedia.org
- List of asteroid close approaches to Earth in 2019
- 2016 AZ8
Использование в fr.wikipedia.org
- 2016 AZ8
Использование в it.wikipedia.org
- 2016 AZ8
Использование в www.wikidata.org
- Q31762994

Метаданные

Файл содержит дополнительные данные, обычно добавляемые цифровыми камерами или сканерами. Если файл после создания редактировался, то некоторые параметры могут не соответствовать текущему изображению.

Примечание GIF-файла

FITS (Flexible Image Transport System) format is defined in 'Astronomy and Astrophysics', volume 376, page 359; bibcode: 2001A&A...376..359H The RX start time is a reasonable approximation to the experiment mid-time. A more accurate mid-time is DATE-OBS + (EXPTIME-RTT)/2 which is typically about 3s earlier Additional -1.34775660853848e-07 s added: Range curvature correction If FREQSAMP < FFTLEN, then the transform was zero-filled SAMPPBD is the number of input samples taken per baud. ROWSPBD is the number of output image rows saved per baud. ROWSPBD and SAMPPBD may differ either because data were thrown away, or because the extra samples were used in the frequency processing. CODEPROC is the code processing method: values are short, long_orig, or long_mod. short means short-code data processed so that each Doppler fft includes data from all samples per baud; long_mod means long-code data processed in the same way; long_orig means long-code data where each sample per baud is processed separately and the separate images are then interleaved in delay.
FITS (Flexible Image Transport System) format is defined in 'Astronomy and Astrophysics', volume 376, page 359; bibcode: 2001A&A...376..359H The RX start time is a reasonable approximation to the experiment mid-time. A more accurate mid-time is DATE-OBS + (EXPTIME-RTT)/2 which is typically about 3s earlier Additional -1.27138996219855e-07 s added: Range curvature correction If FREQSAMP < FFTLEN, then the transform was zero-filled SAMPPBD is the number of input samples taken per baud. ROWSPBD is the number of output image rows saved per baud. ROWSPBD and SAMPPBD may differ either because data were thrown away, or because the extra samples were used in the frequency processing. CODEPROC is the code processing method: values are short, long_orig, or long_mod. short means short-code data processed so that each Doppler fft includes data from all samples per baud; long_mod means long-code data processed in the same way; long_orig means long-code data where each sample per baud is processed separately and the separate images are then interleaved in delay.
FITS (Flexible Image Transport System) format is defined in 'Astronomy and Astrophysics', volume 376, page 359; bibcode: 2001A&A...376..359H The RX start time is a reasonable approximation to the experiment mid-time. A more accurate mid-time is DATE-OBS + (EXPTIME-RTT)/2 which is typically about 3s earlier Additional -8.79262529451807e-09 s added: Range curvature correction If FREQSAMP < FFTLEN, then the transform was zero-filled SAMPPBD is the number of input samples taken per baud. ROWSPBD is the number of output image rows saved per baud. ROWSPBD and SAMPPBD may differ either because data were thrown away, or because the extra samples were used in the frequency processing. CODEPROC is the code processing method: values are short, long_orig, or long_mod. short means short-code data processed so that each Doppler fft includes data from all samples per baud; long_mod means long-code data processed in the same way; long_orig means long-code data where each sample per baud is processed separately and the separate images are then interleaved in delay.
FITS (Flexible Image Transport System) format is defined in 'Astronomy and Astrophysics', volume 376, page 359; bibcode: 2001A&A...376..359H The RX start time is a reasonable approximation to the experiment mid-time. A more accurate mid-time is DATE-OBS + (EXPTIME-RTT)/2 which is typically about 3s earlier Additional -1.30180019652926e-07 s added: Range curvature correction If FREQSAMP < FFTLEN, then the transform was zero-filled SAMPPBD is the number of input samples taken per baud. ROWSPBD is the number of output image rows saved per baud. ROWSPBD and SAMPPBD may differ either because data were thrown away, or because the extra samples were used in the frequency processing. CODEPROC is the code processing method: values are short, long_orig, or long_mod. short means short-code data processed so that each Doppler fft includes data from all samples per baud; long_mod means long-code data processed in the same way; long_orig means long-code data where each sample per baud is processed separately and the separate images are then interleaved in delay.
FITS (Flexible Image Transport System) format is defined in 'Astronomy and Astrophysics', volume 376, page 359; bibcode: 2001A&A...376..359H The RX start time is a reasonable approximation to the experiment mid-time. A more accurate mid-time is DATE-OBS + (EXPTIME-RTT)/2 which is typically about 3s earlier Additional -8.5345263300951e-08 s added: Range curvature correction If FREQSAMP < FFTLEN, then the transform was zero-filled SAMPPBD is the number of input samples taken per baud. ROWSPBD is the number of output image rows saved per baud. ROWSPBD and SAMPPBD may differ either because data were thrown away, or because the extra samples were used in the frequency processing. CODEPROC is the code processing method: values are short, long_orig, or long_mod. short means short-code data processed so that each Doppler fft includes data from all samples per baud; long_mod means long-code data processed in the same way; long_orig means long-code data where each sample per baud is processed separately and the separate images are then interleaved in delay.
FITS (Flexible Image Transport System) format is defined in 'Astronomy and Astrophysics', volume 376, page 359; bibcode: 2001A&A...376..359H The RX start time is a reasonable approximation to the experiment mid-time. A more accurate mid-time is DATE-OBS + (EXPTIME-RTT)/2 which is typically about 3s earlier Additional -1.27704339547563e-07 s added: Range curvature correction If FREQSAMP < FFTLEN, then the transform was zero-filled SAMPPBD is the number of input samples taken per baud. ROWSPBD is the number of output image rows saved per baud. ROWSPBD and SAMPPBD may differ either because data were thrown away, or because the extra samples were used in the frequency processing. CODEPROC is the code processing method: values are short, long_orig, or long_mod. short means short-code data processed so that each Doppler fft includes data from all samples per baud; long_mod means long-code data processed in the same way; long_orig means long-code data where each sample per baud is processed separately and the separate images are then interleaved in delay.
FITS (Flexible Image Transport System) format is defined in 'Astronomy and Astrophysics', volume 376, page 359; bibcode: 2001A&A...376..359H The RX start time is a reasonable approximation to the experiment mid-time. A more accurate mid-time is DATE-OBS + (EXPTIME-RTT)/2 which is typically about 3s earlier Additional -1.7035056032455e-08 s added: Range curvature correction If FREQSAMP < FFTLEN, then the transform was zero-filled SAMPPBD is the number of input samples taken per baud. ROWSPBD is the number of output image rows saved per baud. ROWSPBD and SAMPPBD may differ either because data were thrown away, or because the extra samples were used in the frequency processing. CODEPROC is the code processing method: values are short, long_orig, or long_mod. short means short-code data processed so that each Doppler fft includes data from all samples per baud; long_mod means long-code data processed in the same way; long_orig means long-code data where each sample per baud is processed separately and the separate images are then interleaved in delay.

Файл:2016AZ8 Radar.gif

Краткое описание

Лицензирование

Краткие подписи

Элементы, изображённые на этом файле

изображённый объект

2016 AZ8

MIME-тип

image/gif

контрольная сумма

d54be8f6a743554a9feab1703a266511fc3797b4

размер данных

588 084 байт

продолжительность

1,4 секунда

высота/рост

400 пиксель

ширина

400 пиксель

История файла

Использование файла

Глобальное использование файла

Метаданные

Навигация

Файл:2016AZ8 Radar.gif

Краткое описание

Лицензирование

Краткие подписи

Элементы, изображённые на этом файле

image/gif

d54be8f6a743554a9feab1703a266511fc3797b4

588 084 байт

1,4 секунда

400 пиксель

400 пиксель

История файла

Использование файла

Глобальное использование файла

Метаданные

Навигация

Поиск